VR6000 Wide range of underground metal detector

VR6000 Wide range of underground metal detector

Traditional type metal detector, by waving arm work, day of work areais limited, if encountered overgrown, bad terrain more is cannot work. due towork principle of different, traditional type metal detector of detection depthare is limited, for sought better of metal detection method, I by introducedhas abroad advanced of far distance detection metal technology, by repeatedlyresearch test, development out VR long range locators series big depth fardistance metal detection system, That treasures precious metals directionalindicates instrument. its features is super depth big area fast scan detection,several minutes of detection area equivalent General of metal detector longtime of workload. its signal can wearing mountain, detection outgold/silver/copper/lead/Tin/diamond six species precious metals. instrumentused microprocessor control, central unit including exception correction, non-driftmore road transmission and prior programming of separation players switch.instrument can in is big of range within sent and receives objects signal,Maximum detection range up to 1000 metres. penetration test 40 meters of thetrench signal attenuation, geological conditions under ideal conditions forsingle coin detecting depth of up to several meters. apparatus is simple,without literacy can be learned in a day.

     Dig a small pit in front of transmitter, about 3.5 inches,buried in a receiving antenna, buried up to overwhelm black lines. Machineelements that selector dial to the element you want to detect, then turn thetransmitter, knob anticlockwise horizontally and vertically adjustable. Not allcases are headed in the right (this also depends on the geological environmentin your place), and then again in the opposite direction back to thecorresponding light starts to shine. After 3-5 minutes, the transmitter is 25feet away, you will receive plug into the receiver, with headphones on. Openreceiver volume to a half, moved to no sound, then slowly walking andtransmitters, and when you hear the sound it emits and the same radio begantest transmissions, pay attention to the detection and transmission distance.Back 5 feet, for example, if you are from the transmitter within 15 feet, thenfell back to about 20 feet from it. Skilled in the use of receiving, go aroundthe transmitter around, still maintaining distance from the transmitter is 20feet away, if there are in the region you're looking for a target, receivingRod will not cross.

     Buried metal objects, you can do the test, buried metal objects suchas coins or jewelry, about 50 feet away from the conveyor.

As you approach between the receiving antennaand the target when a line is formed, you will hear a frequency headphones.When you are in form of antenna and test when the signal cable, then the soundis loudest, receive poles cross each other. (Remember the signal line is formedbetween the receiving antenna and the target, rather than between thetransmitter and the target form. ) When you cross that line when, the volumewill gradually disappear, while receiving no longer crossed. Then you go 10feet away, for example, say you're 20 feet away from the conveyor, then leave togo 10 feet to 30 feet. Just repeat the steps once again sound loud andreceiving angle of the mark. Starting from the transmitter, mark by just twoplaces an x-axis, turn off the receiver and transmitter. Wait at least 15minutes, move the transmitter and receiver antenna to a new position, justrepeat the steps. Remember to receive antenna part buried in the dirt, thenformed the x axis and x axis intersects the point that as the target of theburial location.

Technical data:

l     maximum continuous power:850 Ma

l     frequency: 433 MHz +/-150

l     memory: EEPROM 16k*8

l     voltage supply: 9-12 voltDC

l     storage temperature:-40-+85 ° c

l     operating humidity 0-95% nocondensation

l     weight: 6.7 kg